News

CEATEC-2019 (Combined Exhibition of Advanced Technologies) – an annual exhibition of innovative technologies and achievements in the field of IT and electronics – took place in Chiba, Japan. Tsuru Robotics participated as part of the booth of Russian manufacturers (11 companies). Our company presented its unique product – inventory viewer, as well as other projects. […]

Mobile operator MTS has opened a platform for the development and testing of digital solutions for devices operating in the 5G zone – MTS StartUp Hub at VDNH. Any technology company whose solution uses 5G can become a resident of the Hub. The specialists of the innovation site selected nine companies out of 100 submitted […]

The 39th international IT exhibition of the Persian Gulf region – GITEX Technology Week 2019 (GITEX – Gulf Information Technology Exhibition) was held in Dubai. Tsuru Robotics became the Activation Partner of the event. The task of the activation partner is not just to exhibit high-tech products, but to show them in action. That, of […]

The project of one of the world’s largest advertising agencies Saatchi & Saatchi — mural for Sprite in Kyiv, drawn by Tsuru Robotics graffiti drone, won the Red Dot Design Award-2019. This is the most prestigious award in the field of design, awarded by the “Design Center of North Rhine-Westphalia.” Designers and companies are awarded […]

Tsuru Robotics participated in SIGGRAPH-2019 (Special Interest Group on Graphics and Interactive Techniques) — the most prestigious annual conference held since 1974. This time it took place in Los Angeles. To participate in the conference, we applied an article – “Graffiti drone: drawing graffiti using a group of drones.” to Emerging Technologies section. The article […]

The historical event happened in Turin on June 25-26, 2019— four autonomous Tsuru Robotics graffiti drones created the world’s first drawing (10 by 15 meters) on the building. Most significant technical web-sites told about this event. Web-site cnet.com notes that now the famous graffiti artist Banksy had real rivals in the creation of large canvases […]

Tsuru Robotics CTO Nikita Rodichenko spoke in an interview with RIA Novosti about the future of drone delivery in Russia, as well as about the experience of our company in this field. In his opinion, mass transportation of goods by drones may begin in the coming years – even though there is no specific demand […]

This year Altium Forum was held in St. Petersburg. The Forum suggests a unique opportunity to meet and communicate with developers and users of Altium software products. Tsuru Robotics CTO Nikita Rodichenko had a 30-minute presentation there. He spoke about the reference-design project “Mini-Drone” – a drone in Altium Designer 19. The reference design is […]

As a part of Skolkovo business mission, Tsuru Robotics participated in the annual conference VivaTech, held in Paris. VivaTech is not just a technology conference, but a real holiday of innovations, an exhibition of the world’s brightest startups. This year VivaTech has united around 100 000 participants. Tsuru Robotics held a series of meetings with […]

The meeting of Tsuru Robotics CTO Nikita Rodichenko with the heads of Japan Management Association (JMA) — the Japanese Association of CTOs, took place in Skolkovo. The JMA delegation arrived in Moscow to study Russian companies and select interesting ones for cooperation with Japanese firms. The meeting took place in preparation for the visit of […]

Exhibition hall Manege held the fourth international exhibition ARABIA-EXPO. Arab countries, Russian regions, and Russian and Arab companies participated in the exhibition. Tsuru Robotics presented its automatic warehouse inventory system as part of the joint Skolkovo booth. The system scans barcodes located on pallets and enters data into the table in real time. The first […]

The German large IT company SAP, a manufacturer of software for organizations, held an innovative day “Evolution of customer experience in the segment of fast-growing companies” in Moscow, in which Tsuru robotics was invited to participate. One of the main topics of this event was the development of digital marketing, in particular, the introduction of […]

Altium, a leading global developer of PCB designing software, announced the start of cooperation with our company. Within its framework, Tsuru Robotics created drone reference design in Altium Designer. The main objective of the partnership was to develop the design of a compact unmanned multirotor that includes features from complex professional devices. As a result, […]

Voronezh hosts the “robots’ festival” from February 28 to April 7. The festival features more than 70 robots, VR, and several techno shows. One of the show is the drones’ theater, that was created on the basis of Tsuru Robotics mobile show complex. Our team delivered the complex to the customer in Voronezh. Five drones give […]

FutureLab developed a contact technology “cablewalker” for the diagnosis of power lines under voltage. After takeoff, the drone sits on the line, switches off the propellers, and starts moving along the wire with the help of the wheel module. The advantages of this technology are the ability to deliver diagnostic equipment without disconnecting the voltage […]

Tsuru Robotics installed its autopilots on several large drones, developed by Taiwan Industrial Technology Research Institute (ITRI). Tsuru delivered autopilots to Taiwan then mounted and configured them. The integration was done for drones with six, eight and 18 propellers, ranging in size from 2 to 3.5 meters. Drones with Tsuru Robotics autopilots showed excellent flight […]

Altium, a leading developer of software for PCB design, held its annual meeting Altiumlive in Munich. This time Tsuru Robotics participated in it, demonstrating a reference design of the drone created in the Altium Designer program. Nikita Rodichenko, Tsuru Robotics CTO, presented our work at Altiumlive.

Tsuru Robotics congratulates all its customers, partners and friends with the New year! We hope that 2019 will be even more fruitful than the previous year, in which our company has achieved impressive success. We implemented more than 20 projects, many of which became a new word in the Russian and World robotics field. Tsuru […]

The center for contemporary art Winzavod hosted the II Russian-German forum of creative industries ART-WERK 2018. Panel discussion “Innovation blurs the boundaries: the place of creative industries in the world of technology” opened the forum. Tsuru Robotics CTO Nikita Rodichenko participated in the discussion. He spoke about the company’s projects in the event industry, as […]

The video was shown in the program “Science: robotics”. The video is available on the website of the TV channel – link. Duration: 8:39 — 11:28.

Skolkovo hosted another Skoltech Industry Day, an event dedicated to Skoltech’s mutually beneficial cooperation with various companies. Tsuru Robotics CTO Nikita Rodichenko gave a speech at the opening plenary session. He said that the company was founded by Skoltech students a few years ago, and now Tsuru Robotics itself contributes to the students training. This […]

Tsuru Robotics CTO Nikita Rodichenko participated in the discussion “Creation of light shows with the use of flying machines” that happened within the framework of the Moscow international festival “Circle of light”. He spoke about the strategic objectives of the company, as well as about two projects related to lighting solutions – drone show for […]

The video was released in the program «Heads and tails. Russia. Moscow» The video is available on “Friday” website. Link. Timing: 58:13 — 59:59.

Our mini-quadrocopter assembly kit Nanopix is gaining popularity. The company Minibot held two master classes on assembly and control of devices, each of which was attended by more than 50 people. The first master-class happened in the framework of the already traditional famous open air science festival Geek Picnic, dedicated to modern technology, science, and […]

Kursir LLC. (Skolkovo resident) completed tests of its innovative ILS calibration system installed on the drone, created by our company, in Noyabrsk (Yamalo-Nenets Autonomous Okrug). Kursir developed a mobile device for operational checks of airport systems, responsible for the safety of the landing. Today, the verification of radio equipment for flights around the world are […]

Tsuru Robotics has received accreditation as a center of R&D of Skolkovo Technopark. R&D centers are companies that offer Skolkovo residents the possibility to use their equipment, as well as carrying out various types of research and development. From now on Tsuru Robotics can develop electronics, embedded software, and drones (from idea to prototype) for […]

Tsuru robotics together with Space CREI and Laboratory of intelligent space robotics organized an Open Day about the Masters and Postgraduate studies in Skoltech. Nikita Rodichenko, Skoltech graduate and CTO of Tsuru robotics, told how recent students managed to build a technology startup and develop it into a large company, which, in 3 years, has […]

Journalists from«Pyatnica News» called the employees of our company people from the future. The video is available on Pyatnica News web-site: Pyatnica-news-89-22-05-2018 Timing: 14:17 — 16:02

For the first time our company held a show of drones in a very limited space: the performance took place in one of the rooms of Moscow apartments. Flight space was an area of 4×4 m, and height limited to a three-meter ceiling. Three small drones (20 cm diagonal) with scattered led lighting participated in […]

Skoltech-Tsuru Flying Arena, opened in Technopark, is the largest Russian indoor flight zone for unmanned aerial vehicles. Skolkovo Technopark provided the space for the zone. The area of SxT Arena is 260 sqm, ceiling’s height is seven meters. This Arena with the preinstalled local positioning system is located on the ground floor of Technopark. The […]